It can be produced with Gas forming forming technology for good's difficult design which cannot be produced in normal forming conditions. Material's elongation is increased due to exposure to excessive heat, production is made by an accurate net control in charge of counter pressure's progress, facilitie's servo units and user-friendly control software on the basis of theoretical research activities.
TALLIS Tech serves various magnificient gas forming productions to customer.
Superplastic forming Parts are generated with TALLIS Tech's high-technology which can show hundreds of percent forming rate.
It makes possible to realize complex design with superplastic forming's
1 process, which should be controlled to the material's
environment of specific temperature, specific forming pressure and
specific forming speed. Superplastic forming process uses only air
source like nitrogen with no other effluent, so echo-friendly.
forming process includes multi-steps that uses a hot-forming press and
an inert, pressurized gas such as argon. First, a metal blank is loaded
in a die between two platens. The press then heats the blank and die to
temperatures as high as 1000 degrees Celsius. When the superplastic
temperature is achieved, the inert gas inflates the blank to fit the
die. This produces a part which conforms to the die's smallest details.
In some cases, superplastic forming press is followed by diffusion
bonding, a solid-state joining process that holds pre-machined
components under load at elevated temperatures in a protective
atmosphere or vacuum. Often, superplastic forming equipment that
performs diffusion bonding is used with aerospace applications.